Analisi Dettagliata dei Match di Handball Bundesliga Germania di Domani
La Handball Bundesliga tedesca continua a catturare l'attenzione di appassionati e scommettitori in tutto il mondo. Con i match di domani, ecco un'analisi approfondita delle partite, insieme a previsioni di scommessa per aiutarti a navigare nel panorama emozionante della Bundesliga. Scopriamo insieme le squadre in gioco, le loro performance recenti e i fattori chiave che potrebbero influenzare l'esito delle partite.
Programma dei Match
Domani la Bundesliga vedrà diverse partite cruciali che potrebbero determinare la classifica finale. Ecco un elenco delle partite principali:
- THW Kiel vs. Rhein-Neckar Löwen
- Füchse Berlin vs. SC Magdeburg
- SG Flensburg-Handewitt vs. Frisch Auf Göppingen
THW Kiel vs. Rhein-Neckar Löwen
Riepilogo della Squadra
Il THW Kiel, conosciuto per la sua formazione solida e la capacità di eseguire strategie complesse, è attualmente uno dei favoriti per la vittoria del campionato. Con una serie di vittorie consecutive, la squadra ha mostrato un gioco impeccabile sia in difesa che in attacco.
Rhein-Neckar Löwen: Un Avversario da Non Sottovalutare
Rhein-Neckar Löwen, pur avendo affrontato qualche difficoltà nelle ultime partite, resta una delle squadre più temibili del campionato. La loro capacità di reagire sotto pressione li rende sempre un avversario difficile da battere.
Fattori Chiave
- Forma Attuale: Il THW Kiel è in grande forma, avendo vinto le ultime cinque partite.
- Infortuni: Nessun giocatore chiave è fuori per infortunio nella squadra del THW Kiel.
- Prestazioni Recenti: I Rhein-Neckar Löwen hanno vinto solo due delle ultime sette partite.
Predizione Scommesse
Data la forma attuale e la stabilità della squadra del THW Kiel, si prevede una vittoria per loro con un margine di almeno quattro gol. Una scommessa su una vittoria del THW Kiel con handicap -2 potrebbe offrire un buon ritorno.
Füchse Berlin vs. SC Magdeburg
Füchse Berlin: Leader Indiscussi?
Füchse Berlin ha dimostrato di essere una forza dominante nella Bundesliga, mantenendo una posizione costante nella parte superiore della classifica. La loro difesa è particolarmente forte, rendendoli difficili da superare.
SC Magdeburg: Sfida Determinata
SC Magdeburg ha mostrato miglioramenti significativi nelle ultime settimane e cerca di mantenere la loro posizione nella zona playoff. La loro offensiva dinamica potrebbe rappresentare una minaccia per la difesa dei Füchse Berlin.
Fattori Chiave
- Difesa Füchse Berlin: Una delle migliori della lega, con pochi gol subiti nelle ultime partite.
- Attacco SC Magdeburg: Ha segnato più di 30 gol in tre delle ultime cinque partite.
- Influenza dello Stadio: Giocando in casa, i Füchse Berlin potrebbero beneficiare del supporto del pubblico locale.
Predizione Scommesse
Considerando la forza difensiva dei Füchse Berlin e il vantaggio casalingo, è probabile che vinca con un margine ridotto. Una scommessa sulla vittoria dei Füchse Berlin con handicap -1 sembra promettente.
SGB Flensburg-Handewitt vs. Frisch Auf Göppingen
SGB Flensburg-Handewitt: Equilibrio Perfetto?
SGB Flensburg-Handewitt è noto per il suo gioco equilibrato e la capacità di adattarsi rapidamente alle situazioni di gioco. La squadra ha dimostrato resilienza nelle sfide recenti, mantenendo una buona media di punti per partita.
Frisch Auf Göppingen: Sorpresa Potenziale?
Frisch Auf Göppingen sta cercando di confermarsi come una delle sorprese del campionato. Nonostante alcune sconfitte recenti, la squadra ha mostrato spirito combattivo e determinazione a migliorare costantemente.
Fattori Chiave
- Ritmo del Gioco: Flensburg-Handewitt ha mantenuto un ritmo costante nelle ultime partite, controllando bene il tempo sul campo.
- Dinamicità Göppingen: Con giovani talentuosi in campo, Göppingen può sorprendere con rapidità e creatività.
- Influenza dei Singoli Giocatori: Le prestazioni individuali possono fare la differenza in questa sfida equilibrata.
Predizione Scommesse
Data l'equilibrio tra le due squadre e le recenti prestazioni costanti dei Flensburg-Handewitt, si prevede una vittoria per loro con un margine stretto. Una scommessa sulla vittoria con handicap -0.5 potrebbe essere una scelta saggia.
Analisi Statistica delle Prestazioni Recentemente
Prestazioni Recenti del THW Kiel
- Media gol segnati: 32 per partita
- Media gol subiti: 24 per partita
- Vittorie consecutive: 5
Prestazioni Recenti dei Rhein-Neckar Löwen
- Media gol segnati: 28 per partita
- Media gol subiti: 27 per partita
- Vittorie consecutive: 2
Prestazioni Recenti dei Füchse Berlin
- Media gol segnati: 30 per partita
- Media gol subiti: 20 per partita
- Vittorie consecutive: 6 (incluse le ultime due)
Prestazioni Recenti dello SC Magdeburg
- Media gol segnati: 26 per partita
- Media gol subiti: 25 per partita
- Vittorie consecutive: 1 (ultima settimana)
Prestazioni Recenti dei SGB Flensburg-Handewitt
- Media gol segnati: 29 per partita
- Media gol subiti: 26 per partita
- Vittorie consecutive: 3 (ultime tre settimane)
Prestazioni Recenti dei Frisch Auf Göppingen
- Media gol segnati: 25 per partita
- Media gol subiti: 28 per partita
- Vittorie consecutive: Nessuna (ultime quattro settimane)
jarmoluk/micropython-nrf52840<|file_sep|>/ports/nrf52/boards/feather_nrf52840/drivers/lis2dh.py
# MicroPython driver for ST LIS2DH accelerometer.
# Copyright (c) STMicroelectronics
# MIT license; see LICENSE for details
from micropython import const
from machine import I2C
_I2C_ADDR = const(0x18)
class LIS2DH:
def __init__(self, i2c):
self.i2c = i2c
self.i2c.writeto(_I2C_ADDR, b'x20x57')
self.i2c.writeto(_I2C_ADDR, b'x21x00')
self.i2c.writeto(_I2C_ADDR, b'x23x08')
def get(self):
xl = self.i2c.readfrom_mem(_I2C_ADDR,0x28,6)
x = int.from_bytes(xl[0:2], 'little', signed=True)
y = int.from_bytes(xl[2:4], 'little', signed=True)
z = int.from_bytes(xl[4:6], 'little', signed=True)
return x,y,z
<|file_sep|># MicroPython nRF52840 port
This is a port of MicroPython to the nRF52840 SoC by Nordic Semiconductor.
## Building
Build tools and dependencies are described [here](https://github.com/micropython/micropython/tree/master/mpy-cross).
To build the firmware run `make` inside this directory.
If you're on macOS and encounter problems with `gdb-multiarch` not being found,
try setting the `PATH` variable to include the following:
export PATH=/usr/local/opt/binutils/bin:$PATH
## Flashing
The firmware can be flashed via `nrfjprog` (part of the [Nordic SDK](https://www.nordicsemi.com/Software-and-tools/Software/nRF5-SDK-for-BLE)).
Alternatively you can use the [pyOCD](https://github.com/mbedmicro/pyOCD) utility.
### pyOCD
To flash with pyOCD use the following command:
bash
pyocd flash --target nrf52840 --flash-app erase --flash-app build/feather_nrf52840/firmware.bin --connect-under-reset
Note that if you are using the Feather nRF52840 board you may need to connect it to your PC via USB and power it via its power jack before running this command.
### nrfjprog
To flash with `nrfjprog`, first erase the flash with:
bash
nrfjprog -f nrf52 --eraseall
Then flash with:
bash
nrfjprog -f nrf52 --program build/feather_nrf52840/firmware.bin --sectorerase --verify --reset
## Bootloader
The bootloader is based on [the one from Adafruit](https://github.com/adafruit/nrf5-bootloader).
It has been modified to support serial over UART.
It can be flashed using the method described above.
After flashing it you will need to press and hold the BOOTSEL button while connecting the device to your PC via USB.
This will put it into bootloader mode.
You can then use any serial terminal program (such as `screen`) to connect to it at `/dev/ttyACM0`.
The baudrate is set to `115200`.
## Testing
### REPL
The REPL baudrate is set to `115200` by default.
### Blinking LED
You can test if everything is working by uploading the following script via REPL:
python
import machine,time
led=machine.Pin(17,machine.Pin.OUT)
while True:
led.value(not led.value())
time.sleep_ms(100)
## Using PyBoard Accessories library
The PyBoard Accessories library by Damien P. George has been adapted for this port.
You can install it from [PyBoard Accessories GitHub page](https://github.com/damien-p-g/PyboardAccessories) or from [PyPI](https://pypi.org/project/pyboard-accessories/).
Once installed you can run it by simply doing:
python
import accessories
accessories.run()
It will start an HTTP server on port `80`, which you can access from your browser.
It also sets up all buttons and LEDs available on your board.
<|file_sep|># SPDX-License-Identifier: MIT
from . import board_runner_mpy as runner
runner.main(
targets=[
"feather_nrf52840",
],
)
<|repo_name|>jarmoluk/micropython-nrf52840<|file_sep|>/ports/nrf52/modules/camera.c
/*
* This file is derived from rpi_ws281x.c from the Adafruit NeoPixel library:
*
* Copyright (c)2016 Adafruit Industries
* Author(s): Tony DiCola & Limor Fried/Ladyada for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE,
* ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#include "py/runtime.h"
#include "shared-bindings/board/__init__.hpp"
#include "shared-bindings/camera/__init__.hpp"
#include "shared-bindings/camera/cameraio.hpp"
#include "supervisor/shared/sync.h"
#include "soc/iocon_reg.h"
#define CAMERA_CS_PIN PIN_PA02 // CS pin for camera on Feather nRF52840 Express board
#define CAMERA_SCK_PIN PIN_PA10 // SCK pin for camera on Feather nRF52840 Express board
#define CAMERA_MOSI_PIN PIN_PA11 // MOSI pin for camera on Feather nRF52840 Express board
#define CAMERA_MISO_PIN PIN_PA12 // MISO pin for camera on Feather nRF52840 Express board
// Image size parameters; change these if you're using a different sensor!
#define CAM_W (640)
#define CAM_H (480)
// Camera configuration parameters; these should be tuned based on your lighting conditions!
#define CAM_GAIN (16) // Gain value between min=1 and max=16; lower values are brighter!
#define CAM_VSTROBE (15) // Vertical blanking strobe value between min=1 and max=15; lower values are brighter!
#define CAM_HREFSTART (44) // Horizontal reference start value between min=44 and max=60; lower values are brighter!
#define CAM_HREFEND (2748) // Horizontal reference end value between min=2728 and max=2900; higher values are brighter!
static uint8_t spi_buf[4096];
static uint8_t spi_buf_index;
static uint8_t spi_buf_remaining;
static bool cs_on(void) {
return GPIOPinRead(GPIO_PORTA_BASE,GPIOPinRead(GPIO_PORTA_BASE,CAMERA_CS_PIN));
}
static void cs_off(void) {
GPIOPinWrite(GPIO_PORTA_BASE,CAMERA_CS_PIN,CAMERA_CS_PIN);
}
static void cs_on(void) {
GPIOPinWrite(GPIO_PORTA_BASE,CAMERA_CS_PIN,(~CAMERA_CS_PIN)&CAMERA_CS_PIN);
}
static void delay_ms(int ms) {
for (; ms >0 ; ms--) {
vTaskDelay(pdMS_TO_TICKS(1));
}
}
static void spi_init(void) {
SPIConfig spi_config;
SPIHandle spi_handle;
SPIConfigSetDefaults(&spi_config);
spi_config.dataSize = SPI_DATA_SIZE_8BIT;
spi_config.mode = SPI_MODE_MASTER;
spi_config.masterClkRateHz = SPI_MASTER_CLK_FREQ;
spi_config.bitOrder = SPI_LSB_FIRST;
SPIHandleInit(&spi_handle,&spi_config);
GPIO_setConfig(CAMERA_SCK_PIN,GIO_GPIO_OUTPUT | GIO_GPIO_PRIMARY | GIO_GPIO_NOPULL);
GPIO_setConfig(CAMERA_MOSI_PIN,GIO_GPIO_OUTPUT | GIO_GPIO_PRIMARY | GIO_GPIO_NOPULL);
GPIO_setConfig(CAMERA_MISO_PIN,GIO_GPIO_INPUT | GIO_GPIO_PRIMARY | GIO_GPIO_NOPULL);
SPI_setupPins(&spi_handle,CAMERA_SCK_PIN,CAMERA_MISO_PIN,CAMERA_MOSI_PIN